- Accessories
- Ball Joints
- Battery Boxes
- Brake Parts
- Tabs and Brackets
- Drag Racing Parts
- Floater Parts
-
Lower Control Arms
- Asphalt Style Lower Control Arms
- 27-Series Replacement Parts
- 27-Series Monoball Lower Control Arms
- Misc. Replacement Parts for UB Lower Control Arms
- Replacement Bushings for Stock Control Arms
- UMP Lower Control Arms & Parts
- Stock Replacement Lower Control Arms & Parts
- 25-Series Rubber Bushing Pivot, 3/4" Strut Mount Boss
- 25-Series Rubber Bushing Pivot, "Golf Club" Strut Mount
- Dirt Style Lower Arms
- 25-Series Lower Control Arm Parts
- 25-Series Large Screw-In 5/8" Thread
- 25-Series Large Press-In 3/4" Thread
- 25-Series Large Press-In 5/8" Thread
- 25-Series Large Screw-In 3/4" Thread
- Monoball Housings
- Motor Mounts
- Rear Suspension
- Spring Parts
- Shock Mounts
- Spindles
- Steering Parts
- Sway Bar Adjusters
- Trailing Arms
- Tie Rod Tubes
- Throttle Parts
-
Upper Control Arms
- Heim Joint Upper Control Arms
- Control Arm Mounts
- Camber Shims
- Adjustable Upper Arms
- Street Rod
- 2nd Gen. Camaro Chassis
- Pierce Chassis
- Chevelle Chassis
- Ball Joint Plates
- Inner Shaft Control Arm Parts
- Inner Shaft Style Control Arms - Bolt-In Ball Joint
- Inner Shaft Style Control Arms - High Misalignment Monoball
- Inner Shaft Style Control Arms - Screw-In Ball Joint
- Metric Chassis
Metric Chassis
Sort by:
Recommended
-
Metric Upper, 8" Long, 1 1/4" Right Side Offset, Metric Shaft, Small Bolt-in Ball Joint
Uses ball joint part number 40-3203
-
Metric Upper, 8" Long, 1 1/4" Left Side Offset, Metric Shaft, Small Bolt-in Ball Joint
Uses ball joint part number 40-3203
-
Metric Upper, 8-1/2" Long, 1 1/2" Left Side Offset, Metric Shaft, Small Bolt-in Ball Joint
Uses ball joint part # 40-3203.
-
Metric Upper, 9" Long, 1-1/2" Left Side Offset, Metric Shaft, Small Bolt-in Ball Joint
6-7/8" hole spacing on shaft. Uses ball joint part # 40-3203.
-
Metric Upper, 9-1/2" Long, 1-1/2" Left Side Offset, Metric Shaft, Small Bolt-in Ball Joint
Uses ball joint part # 40-3203.
-
Large GM Bolt-in Upper, 8" Long, 1-1/4" Right Side Offset, 6 7/8" Metric Shaft
Uses ball joint part number 40-3200.
-
15-Series Upper with Standard Ball Joint - 8-1/2" x 1-1/2" Offset - Left Hand
6-7/8" hole spacing on shaft. Uses ball joint part # 40-3200.
-
19-Series Upper with Screw-In Ball Joint - 8" x 1-1/4" Offset - Right Hand
6-7/8" hole spacing on shaft.
-
19-Series Upper with Screw-In Ball Joint - 8-1/2" x 1-1/2" Offset - Left Hand
6-7/8" hole spacing on shaft.
-
Metric Upper, 7" Long, 1-1/4" Right Side Offset, 6 7/8" Shaft, Large GM Bolt-in Ball Joint
For pre-2006 Pierce Chassis cars. Uses ball joint part number 40-3200.
-
Metric Upper, 7" Long, 1 1/4" Right Side Offset, Metric Shaft, Small Bolt-in Ball Joint
Upper control arm with 6 7/8" metric shaft and small bolt in GM ball joint. This control arm is 7" long and 1 1/4" offset for the right side. It will come painted, assembled, and greased unless otherwise requested. We do have the stock metric ball joints, which is part number 40-3203.
-
Metric Upper, 7" Long, 1 1/4" Left Side Offset, Metric Shaft, Small Bolt-in Ball Joint
Uses ball joint part number 40-3203