- Accessories
- Ball Joints
- Battery Boxes
- Brake Parts
- Tabs and Brackets
- Drag Racing Parts
- Floater Parts
-
Lower Control Arms
- Asphalt Style Lower Control Arms
- 27-Series Replacement Parts
- 27-Series Monoball Lower Control Arms
- Misc. Replacement Parts for UB Lower Control Arms
- Replacement Bushings for Stock Control Arms
- UMP Lower Control Arms & Parts
- Stock Replacement Lower Control Arms & Parts
- 25-Series Rubber Bushing Pivot, 3/4" Strut Mount Boss
- 25-Series Rubber Bushing Pivot, "Golf Club" Strut Mount
- Dirt Style Lower Arms
- 25-Series Lower Control Arm Parts
- 25-Series Large Screw-In 5/8" Thread
- 25-Series Large Press-In 3/4" Thread
- 25-Series Large Press-In 5/8" Thread
- 25-Series Large Screw-In 3/4" Thread
- Monoball Housings
- Motor Mounts
- Rear Suspension
- Spring Parts
- Shock Mounts
- Spindles
- Steering Parts
- Sway Bar Adjusters
- Trailing Arms
- Tie Rod Tubes
- Throttle Parts
-
Upper Control Arms
- Heim Joint Upper Control Arms
- Control Arm Mounts
- Camber Shims
- Adjustable Upper Arms
- Street Rod
- 2nd Gen. Camaro Chassis
- Pierce Chassis
- Chevelle Chassis
- Ball Joint Plates
- Inner Shaft Control Arm Parts
- Inner Shaft Style Control Arms - Bolt-In Ball Joint
- Inner Shaft Style Control Arms - High Misalignment Monoball
- Inner Shaft Style Control Arms - Screw-In Ball Joint
- Metric Chassis
Brake Parts
Sort by:
Recommended
-
Weld-On GM Metric Rear Caliper Bracket - 3" Tubing
Weld on caliper bracket to fit the small or "metric" GM brake caliper. All steel with threaded inserts to allow for better thread engagement. The inserts are tapped for the stock 7/16-20 bolts that come factory with these calipers. The bottom of the bracket is notched with a 3" radius.
-
Weld-On Dynalite Front Caliper Bracket - LH
Left side brake caliper mount for Wilwood Dynalite calipers. All steel body with threaded inserts for more thread engagement in comparison to mounts that are just tapped through the steel body. Inserts are tapped 3/8-24 to fit the bolts used with the Dynalite calipers.
-
Clamp-On Dynalite Rear Caliper Bracket - 3" tubing
Clamp on rear caliper bracket for the Wilwood "Dynalite" brake calipers. The clamp is made to fit a 3" axle tube. This mount will come complete with hardware. The Dynalite mount that welds directly to the tube is part number 12-0410 and the mount that is made to weld to an axle tube clamp is part number 12-0411.
-
Weld-On GM Large Rear Caliper Bracket - 3" tubing
Weld on caliper mount made to fit the large GM calipers with a 7 1/16" bolt spacing. All steel with threaded inserts for better thread engagement. This caliper bracket has a 3" radius at the bottom. Part number 12-0402 has a 3 1/2" radius so that it can be welded to a clamp.
-
Weld-On GM Large Rear Caliper Bracket - 3-1/2"
Brake caliper mount made to fit the large GM calipers with the 7 1/16" bolt spacing. All UB Machine brake caliper mounts are built with threaded inserts to allow for better thread engagement. This bracket has a 3 1/2" radius so that it can be welded to a clamp.
-
Clamp-On GM Metric Rear Caliper Bracket
Clamp on caliper bracket made to fit the small GM or "metric" caliper. All steel construction with threaded inserts for better thread engagement. The inserts are tapped 7/16-20 to fit the mounting bolts that came stock with the "metric" calipers. The clamp is held together with two 1/2-13 bolts and is 2" wide.
-
Bolt-On GM Large Front Caliper Bracket - LH
Left side bolt on caliper mount for the large GM brake caliper. Made to bolt up to the Ford Pinto/Mustang ll spindle. All steel construction with inserts for better thread engagement. The inserts are tapped 7/16-20 to accept the bolts that came factory with the GM calipers. The right side caliper mount is part number 12-0405-R.
-
Bolt-On GM Metric Front Caliper Bracket - RH
Right side metric caliper bracket made to bolt up to the Ford Pinto/Mustang ll spindles. All steel construction with threaded inserts for better thread engagement. The inserts are tapped 7/16-20 for the stock bolts that came factory with the GM calipers. Left hand mount is part number 12-0404-L.
-
Bolt-On GM Large Front Caliper Bracket - RH
Right side bolt on caliper mount for the large GM brake caliper. Made to bolt up to the Ford Pinto/Mustang ll spindle. All steel construction with inserts for better thread engagement. The inserts are tapped 7/16-20 to accept the bolts that came factory with the GM calipers. The left side caliper mount is part number 12-0405-L.
-
Bolt-On GM Metric Front Caliper Bracket - LH
Left side metric caliper bracket made to bolt up to the Ford Pinto/Mustang ll spindles. All steel construction with threaded inserts for better thread engagement. The inserts are tapped 7/16-20 for the stock bolts that came factory with the GM calipers. Right hand mount is part number 12-0404-R.
-
Weld-On Dynalite Rear Caliper Bracket - 3" Tube
Rear caliper bracket for Wilwood "Dynalite" brake calipers. All steel with threaded inserts for better thread engagement. The inserts are tapped 3/8-24 to fit the bolts used with the Dynalite calipers. Notched with a 3" radius at the bottom.